Skip to main content

Model A1236 / 4 or 8 GB capacity

129 Questions View all

Two beeps and black screen.

I have the same problem as Angela but my screen is always black, when I try to reset it (by holding the menu and select button for 6sec) it just powers off and back on but still gives the black screen. Then it beebs 2 times, just like Angela's I suppose. I just tried to reset it via iTunes but it still shows a black screen. I can hear the clicks when I use the click wheel. What do I do ?

Greetz James

Answered! View the answer I have this problem too

Is this a good question?

Score 1
1 Comment

My iPod will not turn on I put it on the changer an it beeps 2 times dose that mean its changing


Add a comment

1 Answer

Chosen Solution

jamesschelfaut, there are a few possibilities, but they all require you to disassemble your iPod. It could be loose ribbon cables, corroded connectors, a bad LCD and/or bad backlight circuit. I would check it in that order. Here are the guides to work on it. Hope this helps, good luck.

Was this answer helpful?

Score 1
Add a comment

Add your answer

jamesschelfaut will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 6

Past 30 Days: 18

All Time: 8,507