ATV2 thinks it's on ethernet even when ethernet cable is unplugged

ATV2 keeps saying that "to switch to wifi, remove the ethernet cable". The ethernet cable is NOT plugged in yet ATV2 thinks its is.

Even when I plug an ethernet cable and sometimes configure the connection manually, it does not connect at all.

So with the ethernet cable plugged it does not work, and when unplugged, the ATV2 things it is plugged, hence no wifi! :-(

Any help please? Thanks guys

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

You have a damaged ethernet port. Probably will have to replace the logic board. AS A WORK AROUND go to System Preferences:Network and remove (delete) the Ethernet Service. This may allow you to use only wireless or a USB Ethernet dongle.

If this answer was helpful please remember to return and mark it Accepted.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Ibrahim Lahoud will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 5

Past 30 Days: 31

All Time: 1,263