Click Image To Zoom
Share this Product
February 22, 2012
The problems started with the drive making noise! It then died. After reading the on-line info available, I decided to replace the drive with a CF module and go with 8gb instead of the 4gb drive capacity. It was also time to replace the original battery.
The repair could have gone a little smoother. The new battery was slightly larger than the original and I tried to use the cushions from the drive on the CF module. In the process of putting everything back in the case I managed to crack the glass on the display. I removed the cushions and temporarily put the board back in the case. I was then able to format the CF module and install the i pad software. I followed the instructions and put it on the wall charger. In the meantime I ordered a new display. I replace the broken unit and put everything back and closed up the ends. It all works perfectly now and is faster uploading new tunes or switching tunes while playing. Nice upgrade.
Do not force electronic things (I do know better, but it was late). I could have avoided having to replace the display.
September 13, 2011
Made the mistake to leave (and use) the iPod for years on a Bose player/speaker system - which means that in use or not the battery was continuously in a charging state. Recently I noticed the display having two dark spots about 1/4" dia. each. It was from the battery was now swollen out of shape.
I had a hard time to slowly push everything out of the case (because of the swollen battery) but with the help of the "ifixit" guide, a new display and battery, now I have a perfectly working iPod.
Never leave the battery under continuous charge !
Trust the "ifixit" guides on "how to" - without them one would not be able to do it.