Click Image To Zoom

 
 
 
 
 

Macro Bit Set

$34.95 Was $49.95
You save $15.00!

Product code: IF145-220-1

Product Overview

Standard and Rare Bits for Standard and Rare Jobs

  • All the Torx, Phillips, Pozidriv, Clutch, Torq, Spline, Triwing, Square, Spanner, Hex, Flathead, and Triangle bits you'll need!
  • 97 high quality 1/4" bits made out of CR-V steel
  • Bits selected by iFixit techs, ensuring that you get all the bits you need and none that you don't.
  • Elegant aluminum case with see-through window and labeled bit organizer means you'll always be able to find the right bit.

If you're looking for smaller bits, take a look at iFixit's 54 Bit Driver Kit. For an awesome complementary screwdriver, take a look at our 1/4" Ratcheting Screwdriver.

Kit Contents:

  • 1/4" Magnetic bit holder
  • 1/4" Socket to 1/4" drive adaptor
  • 1/4" Driver to 1/4" socket adaptor
  • 97 bits in the following sizes:
    • Wing nut driver
    • Phillips #0, #1, #2 (x3), #3
    • Flathead 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm
    • Torx T5, T6, T8, T10, T15, T20, T25, T27, T30, T35, T40
    • Torx Security TR8, TR10 TR15, TR20, TR25, TR27, TR30, TR35, TR40
    • Metric Hex 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 7, 8 mm
    • Metric Hex Security 2, 2.5, 3, 4, 5, 5.5, 6, 7, 8
    • SAE Hex (Allen) 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4"
    • SAE Hex Security 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32" 1/4"
    • Clutch 1, 2, 3
    • Torq-set 6, 8, 10
    • Spline M5, M6, M8
    • Triwing 1, 2, 3, 4
    • Square (Robertson) 0, 1, 2, 3
    • Spanner (snake eye) 4, 6, 8, 10
    • Pozi-Drive (PZ) 0, 1, 2, 3
    • Triangle 2 mm

Product Details

  $34.95

 
 

Condition:

New

Warranty:

One year warranty

Add to Cart »

50+ Available

Quantity:

 

Install Videos

 

Product Details Edit

Strange screws appear in equally strange places. Wooden decks? Probably going to need a Square Bit (Roberston). Mobile home? Clutch Bit. Elevator? Spanner. As any DIY enthusiast knows, being caught without the proper tool is incredibly frustrating, and having all of your repair plans derailed by a simple stubborn screw is even worse. The Macro Bit Set puts an end to the problem of missing screw bits. By including all of the most common, uncommon, and security bits, you will be hard pressed to find a screw that you can't turn (and for screws that simply won't turn, we recommend the screw extracting pliers).

Block Image

We put this awesome assortment of bits in a compact aluminum case. With the see through window and laser etched foam bit holder, you won't be ashamed to show off this bit set wherever you go. The next time you head out for a repair or new project, don't leave without bringing along the Macro Bit Set.

Block Image
 

Stories

My Problem

the macro bit set case i received had a pin or rivet missing from one of the corner pieces so it does not open or close very well apart from that the set is good thank you and best wishes

My Fix

n/a

My Advice

n/a

My Problem

I have quite an assortment of smaller bits, but this allowed me to complete my selection with the larger sizes.

My Fix

No repair - just wanted the right tools on hand. (You can NEVER have too many tools!)

My Advice

Ordering at the iFixIt web site is very straigh forward. Screens refresh quickly as you move throught the process. iFixIt ALWAYS ships same day if you order early enough. Because I live less than 100 miles away, products arrive next day for cheap ground rates. Packaging is excellent but not wasteful.

This is an A-1 company doing great work. Favor them with your business.

My Problem

Her iPhone4 was not holding a charge. I searched for iPhone battery replacement, and came to iFitit.com. Ordered the replacement kit, which came in a couple ofdays.

My Fix

While I usually do the electronic repairs, I let my wife know that the process was easy if you watched the iFixit video. The rest is history. The kit was delivered, and by the time I got home, the repair was complete. My Wife's delight at her successful repair was infectious. The repair took a short time, and the instructions were top notch. Thanks for a great product!

My Advice

Don't be afraid. You can do the repair, really you can!

My Problem

Gosh Dernit, A user needed to remove the battery from his rascally laptop, but for some reason the removable battery was designed to only be removed with a torque secure driver, which by tarnation I didn't have.

My Fix

Low and behold, this new fangaled cyber monday happened, and you fellers had prices better than a mule with lipstick. So I yanked out my gold bag and ponied up the price, and now this feller has his laptop all fixed up and ready to ride.

My Advice

Son, if you end up talking like you are in the old west, well by golly you will have people thinking you are crazy...

My Problem

Malfunction as of spilling red wine over keyboard

My Fix

Great guide, the comments are the best part of it, alas I found them afterwards

Some screws (4x) were very tight and therefore damaged and difficult to remove (picture 1)

I used a needle file to create new grip and remove them

The battery cable connector (picture 2) also damaged

the picture in the guide suggests to pry at the corner, better try this slowly with different angles of attack

Luckily it operated normal in spite of the damage

The speaker connector also damaged (picture 3)

removal of the connector should be done very careful

it took some time to reinstall it in the proper way

Installing the track pad

So glad I came this far and tightened the T6 Torx screw of the track pad without checking... Experienced it during boot up, everything had to be done over again (second time was much easier)

Keyboard ribbon cable (picture 2)

though I installed it the right way

By placing the battery afterwards the cable is easily displaced and the Mac Book won't boot up

So I had to remove the under case for the third time

The lower case is constructed of rubber-coated aluminum.

the rubber coating gets lose when removing the lower case multiple times… (picture 4)

With the metal spudger the job was done

and YES in the end everything worked as it should. I fixed it !!

My Advice

Read the guide thoroughly AND ALL the comments before you even start

My Problem

Out of order and nobody could fix it

My Fix

It was hard to find someone to recovery my data from my WD passport. The garantee was gone and I couldn't find someone good enough in the market to repair my HD or recovery my data.

After many researches and with the tools from IFIXIT I was able to recovery partially the data from my HD.

Thank you

My Advice

If you are not expert on such work, study hard how to fix it and be patience. In the end, if you can't fix it, sure we will have more knowledge and expertise on it, making you much more prepared for the next time

My Problem

The original HDD was rather slow, I needed more speed.

My Fix

Smooth and easy - thanks to the ifixit-video-tutorial.

My Advice

Just do it, it's easy.

My Problem

First it looked like it was a tweak problem.

After installing a audio tweak only the up button was responding.

but after de installing and checking on the internet it seems clear that the audio control button itself was broke.

The button was also not making the same sound as the up button when you press it, also pressing feels different.

So I searched the net and found FIXIT.

First there was some misunderstanding with them that they could not ship to Curacao but after it was clear that we do not have zip codes in our Islands the order was shipped, within 5 days I had it here...FAST! Many thx for you support and your nice manuals GREAT

My Fix

Pretty easy, just follow the manual...Nice set up

My Advice

As electronic developer/installer/repair guy it was easy to install according your manuals.

What could be on option, and that is what I always do when I have to demount a lot of screws: I just print a A3 or A4 paper with square blocks and numbers. when I take out some screws I put this in step one. the next screws I place between the lines at step two etc.

Or what I did in this case, I just printed out the pictures in small format and placed the screws on the top of the drawing where I took them out.

Very easy, you never put the wrong screw on the wrong location.

My Problem

changement de l’écran tactile

My Fix

la réparation ma prix 1h30 un peu prêt pour remonté l'écran j'ai utilisé le Magnetic project mat c'était nickel

My Advice

quelque conseil allez doucement tout est miniaturé dans ces téléphone et utilisé des outils adéquate

My Problem

Early 2011 15" Macbook Pro battery gave up after almost exactly 2 years and only 128 cycles. :( Not at all impressed with the longevity of the battery included with my original Macbook Pro

My Fix

The repair was extremely easy. The toolset had everything I needed to do the repair and the battery removal and installation took less than 10 minutes. The online guide shows exactly what you need to do with photos and all. As always, iFixIt is the one stop shop for your needs to do this yourself. Taking it into Apple or a certified workshop (MacStore) takes too long (they want to keep the device until the battery gets it, they won't pre-order it... just silly). There is no reason that anyone that can operate a screwdriver can't do this repair themselves.

My Advice

Ensure you have a a clean workspace and the right tools (very small phillips screwdriver and a 'twisted' 3 prong end). The Macro Bit Set that iFixIt sells includes it all and just made more sense than buying a couple of the tools individually as it's not that much more expensive. Super easy swap!