The Direction Pad is down
Hello
A friend gave me a GB classic in a very good condition. At least from an oustide point of view: not yellowed, no scratch on the screen, etc..
The only problem is that the direction is down so I decided to fix it and opened the GB by thinking that it was only a contact issue
But no.. I noticed that the logic board was a little "broken and splitted" in the area of the direction pad circuit. See picture below
Do you think that there's a way to repair it?
View from back
http://postimg.org/image/ir7bxtnt9/
View from front
http://postimg.org/image/bkxfmkon3/
Thank you in advance for your help
Regards
Is this a good question?