iPad 2 Wi-Fi (EMC 2415)
iPad 2/3/4 Display Bezel
Replace the plastic black or white trim that goes around the border of the front panel glass.
iPad 2 Front Glass/Digitizer Touch Panel Full Assembly
This assembly includes the glass touch panel portion of the display digitizer screen, a blank home button, and adhesive. A perfect replacement for any cracked, broken, or...
iPad 2 Front Glass/Digitizer Touch Panel
This replacement iPad 2 front panel digitizer screen is the glass touch panel portion of the display assembly and does not include the home button assembly. It is compati...
iPad 2 Bluetooth/Wi-Fi Antenna
This replacement Bluetooth and Wi-Fi antenna is compatible with all iPad 2 models: CDMA, GSM, and Wi-Fi only (EMC 2415).
iPad 2 Volume and Power Button Cable
This replacement ribbon cable for the iPad 2 contains buttons for power and volume and includes mute switch. Compatible with all iPad 2 models: CDMA, GSM, and Wi-Fi only ...
iPad 2 Adhesive Strips
These custom cut adhesive strips attach the front panel to the rest of the iPad 2. If you replace a cracked or broken iPad display assembly or screen, you will need new a...
iPad 2 Battery
Replace a model A1376 battery for the iPad 2.
iPad 2 LCD
Replace the 9.7-in. LCD screen in an iPad 2. This does not include the front edge bezel.
iPad 2 Display Data Cable
This cable connects the logic board to the retina display screen.
iPad 2 Screw Set
This set includes all the internal screws for the iPad 2.
Apple released the iPad 2 Wi-Fi on March 11, 2011. Changes include the new A5 processor as well as a front-facing and a rear-facing camera. The iPad 2 Wi-Fi includes 802.11n wireless, but lacks 3G connectivity. This iPad model was offered in 16, 32, or 64 GB capacities with color options of white or black.
In March 2012 Apple began shipping a new version of the iPad 2 Wi-Fi available only in the 16 GB capacity. Externally, the new model can be identified by the EMC number located on the back of the iPad.