V-Moda Crossfade II Wireless Does not power on

The issue could be as simple as a software issue on the V-Moda Crossfade II Wireless. Hold the + and - buttons on the V-Moda Crossfade II Wireless to reset it.

The most common reason for the issue is the charging brick, charging cable, or wall socket used are faulty or broken.

• Change the charging cable to see if it is the problem.
• Change the wall socket used.
• Change the charging brick used.

The problem could be the charging port getting damaged, being dirty, or having something stuck.

• Clean the charging port using compressed air,or q-tips with alcohol.
• Unclog the foreign object from he charging port
• Replace the charging port. See our [Replacement guide for charging port].

Another common issue with the V-Moda Crossfade II Wireless is the battery going bad or dying. Replace the dead battery with a new one. See our [Replacement guide for battery].

Internal wiring within the V-Moda Crossfade II Wireless could be disconnected or damaged.

• Reconnect the wiring.
• Solder the wiring back to its correct position.
• Replace the damaged wiring. See our[Replacement guide for faulty wiring].

Another cause of the V-Moda Crossfade II Wireless not powering on could be a faulty motherboard. The motherboard could have short circuited or have a solder that disconnected.

• Solder the disconnected portion of the motherboard.
• Replace the motherboard .See our[ Replacement guide for motherboard]

The issue could be that the volume on the V-Moda Crossfade II Wireless is turned down to zero or the speakers died.

• Turn the volume up on the V-Moda Crossfade II Wireless by pressing the + button.
• If the speakers are not working, replace the speaker with [Speaker replacement guide].