Student-Contributed Wiki

Student-Contributed Wiki

An awesome student from our education program made this wiki. It is not managed by iFixit staff.

Speakers generate no sound ¶ 

No sound is produced when connected to a stereo.

Wires are not properly connected to the stereo. ¶ 

Check to make sure the wires are plugged into the correct ports in the stereo.

Damaged wires ¶ 

Inspect the wires checking for cuts, kinks, fraying or missing wire insulation.

If there are any signs of damage or any sort of exposed cable this could be a sign of an interrupted signal. In this case it would be best to replace the wire.

Damaged or Blown Speakers ¶ 

If the wires have been cleared as ok, the issue must be with the speakers. Speaker test

Distorted Audio ¶ 

The sound produced for the speaker is either fuzzy, crackling, or rumbling.

Damaged Wires ¶ 

Inspect the wires checking for cuts, kinks, fraying or missing wire insulation.

If there are any signs of damage or any sort of exposed cable this could be a sign of an interrupted signal. In this case it would be best to replace the wire.

Speakers are blown or damaged ¶ 

If there is no damage found in the wires, the issue must be with the speakers. Speaker test

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 11

All Time: 125