Student-Contributed Wiki
An awesome team of students from our education program made this wiki.
Iron Will Not Power On
The iron will not power on while plugged in.
Faulty Power Cord
Unplug the iron and carefully check the cord for frays, or disconnections. If the cord appears to be faulty, you may need to replace it.
Shark Ultimate Professional Power Cord Replacement
No Power Reaching the Iron
Ensure that the power cord is plugged into the wall outlet and that the outlet has an electrical connection. If the outlet does not have an electrical connection, plug the iron into another outlet.
The Iron is Leaking
Water is dripping from the Iron during use.
Cracked Reservoir
Ensure that the reservoir section of the iron is mounted properly.
Faulty Seals
Ensure that there are no cracks or broken seals surrounding the reservoir section. If the reservoir is cracked it will need to be replaced.
The Iron is Not Emitting Any Steam
The iron does not emit steam when the button is pressed down.
Faulty Steam Button
Ensure that the steam button has a range of movement.
Reservoir in Not Full
Ensure that the iron is plugged into a functioning power outlet. Make sure the reservoir has been properly filled with water, if not, fill it with water though the reservoir opening.
The Iron will not Heat Up
The Iron will not heat up while plugged in.
Iron is Not Plugged In
Ensure that the power cord is plugged into a functioning wall outlet, and is free of apparent frays or loose connections.
Not Enough Time to Warm Up
Ensure that the iron has been plugged in for a reasonable amount of time. The iron should begin to heat up after being plugged in for about a minute.
The Buttons on the Iron are Not Working
When pressed, the buttons do not cause an action.
Stuck Buttons
Check the range of motion for each button to see if the button moves properly. If the buttons appear stuck, firmly grasp them and pull upwards, removing them. Then ensure that there is no blockage preventing their range of motion.
Cracked Buttons
Inspect buttons to make sure there are not visible cracks or damage to the button pieces.
Loose Buttons
Ensure that the buttons are not loose and wiggling out of the iron. If the buttons are loose firmly grasp both buttons and pull upwards, removing them. Ensure that the two white pillars underneath are intact and operating properly. If they appear to be loose or broken, the button and dial unit will need to be replaced.
37 Comments
Checked the power cord and no breaks but iron will not show Power light. Button good and do not seems to be faulty,
Mohammad Ansari - Reply
Iron does not come on or get hot
Barbara Daniels - Reply
My iron just stop working. The cord is not damage. It was not emerged in water.
Ann - Reply
The iron should last more than two years three months.$49.88
Ann - Reply
My iron will no longer power on, I've only had it 1 year
Sharmel Jones - Reply
Steam button is not working very lose
Barbara Murray - Reply
Iron just stopped working . Cord is good, plugged to different outlets and iron still will not come on . No power. Have only had it 11 months. Not worth $59.00.
rs1owens - Reply
I put the iron on the top setting, and it immediately goes out.
stubstub33 - Reply
I have had the same issue as many others have noted in the comments. My iron no longer powers on, and I can’t seem to find any reason for it. The cord seems fine, I’ve tried multiple outlets, etc. This seems a bit ridiculous that so many are having the same problem.
Joseph Powell - Reply
I need the manual on how the iron works . It turn of when i am in the middle of ironing a piece of clothing i cant find my manual for my iron. where can i get the manual ?
clifjetnky - Reply
My iron will no longer heat or maintain at at high temp.
Sonya Hardy - Reply
I was using it and it just shut down and won’t come back on. Is there a fuse?
Tom Rychlewski - Reply
I’ve had my iron exactly 1 year and it stopped working. I’ve taken great care of this iron BOO SHARK !!! NEVER AGAIN AFTER READING ALL THESE COMMENTS
Peggy - Reply
My Shark 1800 Watt has worked perfectly for 3 year. Now, first problem, my steam option won't steam. The steam button works fine, but I want constant steam back.
T R - Reply
My iron just burnt up! Had for a year. Black smoke just started pouring out all around the edges. Can I get a refund on this?
gmagill1 - Reply
Shark has virtually no customer service. When I called about mine, they said they would send me a new one - at my expense! $40! No thanks. I'll never buy another one.
stormyg45 - Reply
My Shark iron will not heat up. It is plugged into a good outlet, the cord looks fine, the red light will go off and the green light will blink as if it is heating, but it does not get hot at all.
Kathy Cooper - Reply
My Iron will not turn on. It just stopped working and it’s not even a year old! 4/16/2020
kathy Amero - Reply
My iron works pretty well however d fabric selector knob has stop working can u help me plz.
anil chotai -
Mine never worked!! I confirmed power is going to board
njfranchino - Reply
My iron stopped working. No light, no heat nothing. It’s less than 2 years old. The idea that the electrical outlet is faulty is ridiculous lol. The iron is junk,
saintlouis10 - Reply
After I set to self clean, the iron has not powered on again, I have tried periodically, giving it weeks at a time to feel better.
Maria Harless - Reply
My Shark G1505 dial won’t turn to self clean mode on steam dial
D Chumak - Reply
All of the above apply to my Shark iron. Have had it less than 2 years and rarely use it. Making holiday projects and it won't turn on. Don't buy this product.
Emily Hutchinson - Reply
my iron has a flashing red light but not coming on, can you help me
norrissg54 - Reply
My iron was on and working and then the light went out and no more heating. Plug is good and no damage to iron. What is going on?
debrahilliard52 - Reply
Same thing just happened to me. What a peace of expensive junk.
Linda Turcott -
This is the second Sharp Professional 1800 Iron I purchased and the (STEAM BUTTON) stopped working.
Is there anyway my iron can be replaced
Yvonne Lange - Reply
Grandson bought me the Shark Professional Iron less than 2 years ago and just quit. Tried everything to get it started but no luck. He paid a lot of money for this iron and I am not happy that this did not last at least 2 years.
Linda Turcott - Reply
Checked the power cord and no breaks but iron will not show Power light. Button good and do not seems to be faulty,
Yvonne Hill - Reply
power light is coming on but the iron is not heating
Burgett Kerr - Reply
Checked the power cord and no breaks but iron will not show Power light. Button good and do not seems to be faulty,
Dwain Menzie - Reply
Steam button won’t work,
Satbir singh - Reply
Steam button will not work
Satbir singh - Reply
the iron is pluggin and there are two lights ared and green
Norris Gilkes - Reply
my shark nonstick steam iron is not working , it is pluggin and not heating i am seeing a red and green light can you assist me
Norris Gilkes - Reply
My iron looks brand new, though I’ve had it for a few years, but it’s been hardly used. It will not come on when plugged into several different outlets. Just simply stopped working, like there’s no power. Odd! Normally it would bea reset of the fuse, but there is no reset on this iron. I may open it up to see what exactly is happening inside.
Marina Troost - Reply