Student-Contributed Wiki

Student-Contributed Wiki

An awesome student from our education program made this wiki. It is not managed by iFixit staff.

Samsung NX30 Troubleshooting

Samsung NX30 with mirrorless interchangeable lens was released February 18, 2014.

The flash will not fire when the photo is taken even though the flash is on.

If the flash will not go off, check and make sure that the flash has been turned on. The flash is on if the flash head is up. If the flash head is not up, look at the front of the camera and press the flash button located to the right of the flash head.

If you have already tried the option above and it still does not work, then your flash bulb might be dead. If this is the case, then you will want to replace your flash bulb using the Flash Replacement Guide.

The camera does not respond to controls.

Try resetting the camera to default settings by hitting the menu button on the camera. Then in the sidebar scroll down to select the settings icon. When you have selected the settings icon scroll down until you find the reset option, select this option and press yes. This will reset the settings to default.

If you can not reset the camera to the default settings try turning off the camera. Switch the On/Off Switch to the off position.

If you can not get the camera to turn off by just pushing the On/Off button then try removing the battery. Follow the Battery Replacement Guide to help you with this.

Camera keeps shooting until the card is full. Even after the shutter button is released.

There might be dust build-up around the button. Use an Air Duster can to dislodge the dust.

After going out of sleep mode, the lens refuses to focus.

There might be dust or dirt on the lens. Use a microfiber clothe to wipe the lens of all residue.

Try turning the dials around the lens to adjust the focus manually.

If the lens is still not working then check and make sure that it is properly attached to the camera. Place the lens into the camera and turn it clockwise until it clicks into the camera.

Finally if the lens will still not adjust you will want to replace it using the Lens Replacement Guide.

The camera refuses to connect to the phone via Wifi.

First make sure that the camera is on the Wifi mode. Turn the Settings Dial to Wifi and choose the application that fits your task.

Also check and make sure that your phone's Wifi is on. The Wifi icon on your phone should be on. If it is not, then turn on the Wifi in your phone's settings. The camera will not connect to your phone if your phone's Wifi is off.

Check that your phone is connected to the Wifi network from your camera. The network name will be shown on the camera's screen.


View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 23

All Time: 1,546