Panasonic DVD-RV31 Troubleshooting

Disk won't read ¶ 

No audio/video output ¶ 

  • Make sure all connectors are clean and are firmly connected to proper port.
  • Internal connection of audio/video outputs are disrupted and no longer connected to main printed circuit board.
  • Logic Board or Power Board is malfunctioning.

Disk tray won't eject ¶ 

  • A disk may be stuck in the DVD drive. Listen to hear if the motor and gears are turning properly.
  • The Disk Tray Motor may be malfunctioning.
  • This problem could also be due to unresponsive controls. If this is the case, the Function Board or Control Board may not be working correctly.

Unresponsive controls ¶ 

  • Control printed circuit board is malfunctioning. This prevents the signal from the front panel from reaching the main board.
  • Logic Board is malfunctioning. Usually there are other problems associated with this one.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 12

Past 30 Days: 44

All Time: 3,722