HP iPAQ H2200 Troubleshooting

I cannot see anything on the screen. ¶ 

The device is powered on but the screen remains blank or the screen turns off during use.

Short Backlight Timer ¶ 

The backlight might be set to turn off after only a few seconds. The timer may be changed in the Backlight Settings menu.

Low Battery ¶ 

If the battery is not sufficiently charged, the backlight might not turn on or the device might not power on at all. Try plugging in the AC adapter.

I cannot keep my battery charged. ¶ 

The battery's charge does not last for more than an hour.

Low Battery Charge ¶ 

To ensure a fully charged battery, always keep the HP iPAQ Pocket PC connected to the AC adapter when it is not in use.

Backlight Energy Consumption Too High ¶ 

To reduce the length of time the backlight remains on, reduce the backlight time in the Backlight settings menu.

I cannot connect to a network. ¶ 

No network connection could be found.

Unconfigured Hardware ¶ 

To ensure a reliable network connection, be sure the hardware being used with the HP iPAQ Pocket PC is properly configured and operational.

I can't connect my iPAQ Pocket PC to the internet (wireless). ¶ 

The Internet browser could not be opened because of a connection error.

Router Problems ¶ 

If attempting to connect to a home network, make sure the router is not encrypted or protected by some sort of password.

Terms of Agreement Not Accepted ¶ 

If attempting to connect to an internet hotspot, you must agree to the provider's Terms of Use. To do so, turn on your WiFi, open an internet browser, navigate to any webpage and the Terms of Use should appear on the screen.

My iPAQ Pocket PC is not responding. ¶ 

The screen or one or more applications may be frozen.

Internal RAM Full ¶ 

The internal RAM might have too much information stored on it and may need to be cleared.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 2,499