Canon PowerShot A610 Troubleshooting

Camera Won't Turn On ¶ 

Check the Battery ¶ 

Make sure the camera has full battery. If the camera has't been used in a while or you don't know the condition of the batteries in the camera, this can be a simple solution to your problem.

Check Battery Cover ¶ 

The battery cover might not be completely shut which will cause a bad connection. Make sure the cover is fully closed.

Camera Won't Save Pictures ¶ 

Check Memory Card ¶ 

Check to make sure you have a memory card installed in the camera. Also, make sure the memory card is fully inserted into the camera.

Type of Memory Card ¶ 

Make sure the memory card you are using is compatible with the Canon A610 camera.

Black screen on power up ¶ 

You get a blank screen on power up even when taking pictures, pictures come out black.

Low battery ¶ 

Sometimes a camera may turn the display off to conserve battery. Make sure the camera has full battery and test the display to see if this solves the problem.

Bad CCD ¶ 

There have been numerous reports of a bad batch of CCD's sent out to Canon during the production of this model. It is a very good possibility your CCD went bad. Replacement of the CCD will most likely solve the issue.

Cracked LCD screen ¶ 

If the LCD screen is cracked then you will have to replace the LCD screen.

Zoom lens won't extend out ¶ 

No matter what you do, the zoom lens will not extend out of the camera housing.

Strike firmly but gently on the fleshy part of your palm ¶ 

It is the common solution to any problem and this time it might actually work. It's worth a shot before we begin dissecting your camera.

Drained/bad battery ¶ 

If your camera won't turn on, and therefore won't extend the zoom lens. The batteries might be dead. Insert 4 new AA batteries to see if that does the trick.

Zoom lens is broken ¶ 

If none of the above problems seem to be the case with your camera, it is possible that the zoom lens is broken and needs replacement. We sell the zoom lens to the A610 and offer a step by step guide on how to replace it.

No Flash ¶ 

Check Your Settings ¶ 

Check to make sure the Flash is not turned off in the camera settings.

Dead/Depleted Battery ¶ 

The flash on a camera uses up quite a bit of power and if the battery on your camera is dead/depleted, the flash will not function properly.

Faulty Connection ¶ 

Make sure all screws are tight and that the case is fully closed.

Flash Bulb Has Burned Out ¶ 

The flash might have burned out if the camera's flash is used often. If over time the flash has stop working the most likely source of the problem is a burned out flash bulb that needs to be replaced.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 8

Past 30 Days: 33

All Time: 4,741