Page Stub
This wiki page is a stub. Help us improve this page by adding information to it!
Problem 1: The drill will not start.
Possible causes: Battery pack is not installed properly.
Possible solutions: Check battery pack.
Charge battery pack.
Problem 2: Battery will not charge fully or at all.
Possible causes: The battery is corroded.
Possible solutions: Replace battery
Plug into working outlet.
Problem 3: Strong odor coming from inside of drill.
Possible causes: Buildup of dust inside the drill.
Possible solutions: Dismantle drill using appropriate screwdriver or other tools. Then, clean inside of drill carefully using specially designed brushes for maintenance.
Problem 4: The drill turns on, however the rotating drill head will not spin.
Possible causes: Buildup of debris of bearings.
Possible solutions: Carefully clean debris away from the bearings inside of the drill.
Problem 5: Loud rattling noise occurs while using the drill
Possible causes: loose screws, cogs, or ball bearings.
Possible solutions: Disassemble drill to check if the screws, cogs, and/or ball bearings are loose.
One Comment
after charging 24 hours drill turns but not powerful to drill screws in to wood deck. what could be wrong?
thank you, Cherie
DickCherie Sherman - Reply