Guides I've Contributed To
Answer to: Why is my trigger jammed?The slide might not be positioned correctly. To pull the trigger, it must be be completely cocked and pushed all the way forward. Worst case scenario, something might be lodged in the gun causing the trigger to become nonfunctional. To repair it refer to the guide on disassembling the gun to repair the trigger.
Answer to: How do I remove the magazine?To remove the magazine there are two buttons located on each side of the gun. Use both hands to pull back both buttons at the same time, and then the magazine should simply fall out.
Answer to: How do I fix a broken slide?This problem can arise when either the main spring of the gun or its plunger is broken. To fix the main spring you can refer to the repair guide for replacing the main spring. If the plunger is broken then you might need a new gun due to the availability of parts.
The time of day that you have been active over the last 90 days. Each line on this graph is an action you performed on the site (we only count major actions, like voting and editing posts). The numbers on the bottom of the graph are the hour of the day in Mountain Standard Time.
Page 1 of 5
Reputation over time
|Someone completed your guide||20||384|
|Admin approved your guide||3||300|
|Someone liked your guide||4||25|
|Post was voted up||2||24|
|Post upvoted containing a link to your guide||1||7|
You're on top of things! No new notifications.
adam.lukastik and 3 others completed your guide "Nerf Recon CS-6 Barrel Replacement"
sebastian alban and 2 others completed your guide "Nerf Recon CS-6 Barrel Replacement"
You were awarded the Tenderfoot badge!
Ethan commented on 'Disassembling Nerf Recon CS-6 Shell'
Angela Hirschi commented on 'Nerf Recon CS-6 Plunger Replacement'
Andrew Triebe commented on 'Disassembling Nerf Recon CS-6 Shell'
Mr.H commented on 'Nerf Recon CS-6 O-Ring Replacement'
You were awarded the Craftsman badge!
@muhmmad_kapadia and one other person completed your guide "Nerf Recon CS-6 Barrel Replacement"