Inspiraattori

Hello. iPhone X came to me for motherboard repair (microsoldering). It has dropped to the floor and it constatly...

Hello. I have problem with iPhone 5c doesent detect normal iPhone charger or computer. It doesen't show bolt symbol when...

Hello @refectio! I have water damaged iPhone 6. It is cleaned and there are missing C0633. There was also vvc_main short...

Hi. I have water damaged iPhone 6 with missing C0633. Also C5202_RF is shorted. The phone has been recular repair shop...

First there was no backlight and only LCD worked. The backlight diode was totally burnt and coil was cracked a little on...

Hi. Is it possible that long screw damage can cause short circuit in Logic board so the iPhone can't power on at all, no...

Hello. I have iPhone 6 Plus and I replaced tristar to it. Before repair I tested it with multimeter for how mutch USB...

Hi. I have iPhone 6 and the brightness slider slides but it doesen't do anything. The backlight works but it's wery low...

Hello. I have iPhone 6 not turning on after screen replacement and iTunes doesen't recognize it. Not heating at all. There...

Hi there. I believe you meant the water resistant adheasive that have on new iPhone 6s. So here are the link for that adheasive :) I hope that helped you out. https://www.ebay.com/itm/191933751702 And here are installation guide: https://youtu.be/3xGeLDMS2ek

I had the same problem after replacement of backlight filter (FL2024) on iPhone 6. I cleaned the board with isopropylalcohol and make sure that the screen connector is properly connected that solved problem in my case. I hope that helps your too.