Answers
-
Answer to "Is there any place to buy a replacement battery?"Sears has this model posted. seems pretty spendy to me, if i were you I would look around a little more to see if i could find one cheaper, this one seems to be a little over 50.00 YIKES! there might be a way to rebuild your old battery. http://www.sears.com/es/us/toshiba-pa5208u-1brs-toshiba-cb35-b3330-chromebook-2/p-SPM10817031225?plpSellerId=PC%20Parts%20...
-
Answer to "Phone goes to safe mode after camera replacement!"With jumpers? You have severed a Ribbon, there is no way you are going to be able to jumper a ribbon cable break, what you need to do after a ribbon cable is damaged is locate the part and buy one that is not damaged and then replace it. if the ribbon comes attached to something with no release you will need to bu what ever it is factory mounted to. if both ends have a release you can just replace the cable. The problem is easier for you than some one that has a internal cable separation since the break is obvious. check this out and see if it the one you need, if it is Not then locate the one you do need. this one costs 2.60 USD how cheap is that? http://www.ebay.com/itm/Volume-Button-Flex-Cable-Ribbon-For-Samsung-Galaxy-S6-G920A-G920V-G920P-REV-0-3-/191920383626?hash=item2caf58a68a:g:99IA...
-
Answer to "How to repair damaged power port"from your question there is no way for me to tell exactly what the power port you need repaired is on. if it's a phone, a calculator, or? and what model. there are a lot of things with power ports, some are much easier to fix than others. Most likely though, it's best to remove the old one after buying a new one and then installing the new one. I know that sounds impossible with some Items but you have to remember, it was installed once and so you know it can be installed again, It's just a matter of getting it done.
-
Answer to "iPod won't power on after screen replacement, even when plugged in"Got an email from Andrew. Hey man, if the battery has no charge then the grounding thing is not going to work. you might try it with the cable hooked up. or leave the thing charging for a long time and then try. it has to have current for that to work. if there is no way to charge it, it;s possible your battery is dead as can be and you need a new one to get the current. see what I mean? has to have power source to be able to kick it over.
-
Answer to "iPod white screen after repair the screen."LOL you know whats funny. I just figured out ( last night , i was up all night working on ipod touch 4's) how this is done. 1 thing is for certain. most every white screen that appears to be ruined. is actually good. the other thing - if the white screen effect is not solid but instead has streaks or partially covered reddish lines. That is a bad screen. it's the screens male end or the mother boards female side. the pins are crossing from being bent or broken off or whatever. or it could be the ribbon jacked. sometimes you can straighten the pins back out and get it to work but i do NOT want to get into that because it's so hard it just !@#$%^ me off to think about it, I will tell you this though, you will need a huge lighted magnifying glass to do it and good freaking luck. moral of that story is do not push that plug to hard. LOL your white screen problems are not from a bad screen, your white screen problems are from the gpu getting shut off and on at the wrong times or super fast or when ever it just...
Reputation over time
Reputation Breakdown
Event | Count | Delta |
---|---|---|
Post was voted up | 1 | 12 |
Badges
614443