Answer to: Which screwdriver for replacing ram and hard drive?You will only need a screwdriver for this task and a pair of pliers or a T6 Torx Screwdriver to remove the side anchors on the drives... There are many tutorials on here that can assist you. Links to cheap supplies: Phillips #00 Screwdriver T6 Torx Screwdriver Would need to know which model (late or early) you have to be able to give you a link to the how-to disassemble. Hope This Helps :)
Answer to: 2 discs stuck in driveCouple of options to try: 1) Reboot system and hold down the trackpad button (under the track-pad) during boot-up this should cause the drive to eject anything still left in the drive... Option 2 (Not sure if it will work on the older G4's) Eject a disc with Open Firmware commands Follow these steps: Restart the computer. Immediately after the startup sound, press and hold the key combination Command-Option-O-F. Release the keys when you see a white screen that says "Welcome to Open Firmware." At the prompt, type: eject cd Press Return, then wait a few seconds. The disc drive should eject any disc that is present, and "ok" appears behind your command when the action is complete. Type: mac-boot Press Return. Hope this helps :)
The time of day that you have been active over the last 90 days. Each line on this graph is an action you performed on the site (we only count major actions, like voting and editing posts). The numbers on the bottom of the graph are the hour of the day in Mountain Standard Time.
Reputation over time
|Post was voted up||4||48|