30 pin smd dock connector replacement Nano 5GThe smd dock connector on my 5th gen Nano is broken, would anyone know where i could purchase a new one?
Answer to: 30 pin dock connect has a feww broken pinsThe 30 pin connector is usually replaced when it has pin damage. Although the outside plug might look similar on most models, the actual way the connection is made to the logic board differs from model to model. I hope this helps a little.
Answer to: coil for backlight problemyou can find them on Ebay here is just one listing http://www.ebay.com/itm/New-6R8-Coil-Apple-iPhone-3GS-Dim-Backlight-/330611148098?pt=LH_DefaultDomain_0&hash... should be the same coil for the nano
Answer to: problem after replacing iPod screen (unlock slide dosnt work)Make sure the connector is firmly in its place, sometimes the connector not being fully seated will cause this. You might also check the flex cable on the digitizer, they tend to tear easily when you install them. You might also just have a defective digitizer, try another one or the old one if it works and see if that's the case.
The time of day that you have been active over the last 90 days. Each line on this graph is an action you performed on the site (we only count major actions, like voting and editing posts). The numbers on the bottom of the graph are the hour of the day in Mountain Standard Time.
Reputation over time
|Post was voted up||1||12|