Answer to: stops at spinThis machine doesn't have a belt. But it does sound like a broken lid switch.
Answer to: Not spinningYou have a broken motor coupler. It is a very common failure. It is the link between the motor and transmission, which essentially acts as a belt on these machines. It's a easy repair for an appliance technician and worth repairing.
Answer to: Washer will not agitate after fillingIt is very likely to be a broken lid switch. You can tell this by if you hear a clicking noise when you open and close the lid. If no noise then the switch is broken. If you do hear it then it is possible that you could have a bad motor or timer, either of which are fairly expensive to repair.
The time of day that you have been active over the last 90 days. Each line on this graph is an action you performed on the site (we only count major actions, like voting and editing posts). The numbers on the bottom of the graph are the hour of the day in Mountain Standard Time.
Reputation over time
|Post was voted up||2||24|