Make sure that no unwanted programs are running. The simplest way to do this is to eliminate any extra programs from the system, as the number of installed programs can quickly clog system memory. By accessing the "Add/Remove Programs" option in the Control Panel, you can view an itemized list of installed software. Through this list, you may delete anything unnecessary or unused by you or the system. it also depends on the O.S for more help visit http://smallbusiness.chron.com/fix-slow-toshiba-laptop-44693.html and i am sure this will help
Android normally secures your device by demanding a PIN, pattern, or full password. Your phone isn’t useless if you forget the unlock code — you can bypass it and get back in. As Google tightens security, this has become more difficult on modern versions of Android. But there’s always a way to make your phone usable again, as long as you remember your Google account’s username and its password. Older versions of Android — Android 4.4 KitKat and older — have an integrated way to bypass your pattern, PIN, or other password if you forget it. Google removed this feature in Android 5.0 Lollipop, so you’ll have to use a different method if you have a device with a newer version of Android. To find this feature, first enter an incorrect pattern or PIN five times at the lock screen. You’ll see a “Forgot pattern,” “forgot PIN,” or “forgot password” button appear. Tap it. You’ll be prompted to enter the username and password of the Google account associated with your Android device.
1. Make sure that everything is plugged in. It's entirely possible that a cord could just slip out from the outlet while you're working. If power is present to the monitor and other peripherals, yet there is no power to your computer, there is likely something wrong with your power supply. 2. Hit the power button. The most obvious clue is that the system will do absolutely nothing when you hit the power button. If there is no sound and no monitor activity of any kind, the power supply has probably died. While this can also be caused by a faulty switch, it is usually the result of a burned-out power supply. 3. Look at when your computer boots up. Noticeable changes in how long it takes for your computer to boot up and shutdown, as well as spontaneous rebooting, could be a sign that something is wrong. 4. Check for beeps. If the system makes rapid, short beeps repeatedly and does not boot when you try to get it to, this could be linked to the power supply. 5. Observe any computer failures. If there are system s...
Emergency Data Recovery are caused by corrupted system files. In my experience, if you have Emergency Data Recovery then there is a 96% chance that your computer has registry problems. This error should be fixed immediately to prevent further damage to the Windows system. To solve the problem you need to follow the 3 steps : Step 1: Download & Install Emergency Data Recovery Repair Tool for Free. Note:If the download link doesn't work you may need to Download it Directly from Error Repair Tool Site Here Step 2: Click the "Start Scan" button. Step 3: Click the "Repair All" Button to Repair Your PC Errors!
I dropped my iPhone , not far just from the hip and now its not responding to my finger touching the screen. I have tried restarting the phone but I havent restored it, I think its hardware. Its jailbroken btw. So I think it has to do something with the digitizer or the LCD. Heres the thing, I wanna know which part to buy. If the screen is active , I can see everything but I cant touch it, then in what part is there something going on that is not right
Step 1 Pry the two plastic tabs off the bottom of the device with a metal spudger. Remove the screws underneath with a tri-wing screwdriver. Step 2 Insert a plastic opening tool in-between the screen and the back casing near the bottom left of the device. Slowly pry the face away from the casing, inserting guitar picks as you go to keep the two components separated. Related Reading: How to Sync a Galaxy S4 Calendar With a Galaxy Tab 2 10.1 Step 3 Insert the opening tool through the dock connecter and stick it between the front panel assembly and back casing. Pull the casing up and stick a guitar pick in as a spacer. Step 4 Work your way around the case, separating the front from the back as you go. Use extra caution when you reach the top left corner of the device, as the microphone ribbon cable runs through this area and is very easy to tear. Step 5 Lift the left side of the panel slightly out, and then use the plastic separator tool to pry the bottom and top-right corners out of their clips. Step 6 Life the...
Step 1: Turn off your PC, unplug the power cable and open your system unit. ... Step 2: Check the documentation for your motherboard to locate the position of the jumper that resets the BIOS. ... Step 3: Find the jumper on your motherboard reset it.
1) Uninstall unused programs 2) Automatically delete temporary files 3) Install a solid state drive 4) More hard drive storage 5) Prevent unnecessary start ups 6) Get more RAM 7) Run a disk de fragment 8) Run disk clean up 9) Give your computer a static IP 10) Hoover out the dust