Answer to: What type of adhesive or glue can I use for the lcd & glass?This post is going to be fun, because you will find a way to do it differently than oca method. Are you ready? Ok. The first thing is to separate the glass, the temperature should be 98 to 102 degrees. So that the glue would be easy to be taken off the lcd. Once you separate the lcd do not use any cleaning liquid. I will give you the best trick of the trade for every lcd use a new blade they are so cheap you don't have to use one blade for 2 or 3 lcd's. becareful with the borders as you have a metal frame around the glass that if you break it that lcd is finish, damaged. once you do this then use a cloth and pure acetone to finish the cleaning process. If you get strick marks is because you still have glue adhesive on the lcd clean it until you see a clean lcd. After this, separate the back light with a soldering iron on top of the cable and separate it from the lcd slowly and complete. Put it in a bag then use loca uv light for 3 minutes you don't need more than this as when is dry is dry. After this, clean ...
Answer to: What type of adhesive or glue can I use for the lcd & glass?Hello everyone, I see you are having a hard time doing this. The reason is because loca is only use for samsungs not for iPhones. iPhone is done with a little more technology, thus using oca laminator stickers bond with precision machines. Also the frame has to be assamble by a frame assambler machine that uses pressure and heat. The process is faster and cost effective after you make the $20,000.00 dollar investment. If questions, please write me to my email email@example.com I will explain how to do what you want to do. Remember loca has an expiration time frame of 6 months, so be careful, that may be why is cracking.
Answer to: What type of adhesive or glue can I use for the lcd & glass?I use oca which is great but you have to invest a lot of money on the equipment. But the results are very professional. Good luck loca won't work good.