Answer to: How do I replace thermostats on my Starbucks barista sin006It's a high solids thermal paste used on thermostats up to 500F to conduct heat. It's expensive, so your best bet is to carefully scrape it off the old thermostat and apply it to the new one. Whatever you do, DON'T use thermal grease. https://goo.gl/N77BWt
Answer to: Vector display has collapsed into a single vertical line.Using a 10Mohm resistor,discharge each lead of a HV cap individually to ground, then between the leads,.
Answer to: How can I repair a hole on my shoe sole?I've had "walking" shoes with a supposed "1000 mile wear guaranty" delaminate or separate from the upper or wear through the tread in less than 100 miles of casual walking on concrete sidewalks. Rather than go through the hassle of getting the manufacture to honor the warranty and pay for return shipping, I repair separations and delamination with Gorilla Glue. The normal lifetime of a modern casual shoe with a non-leather sole is generally less than 1 year of actual use. Composite soles with a tread and a foam midsole wear the fastest, rubber lug block soles somewhat slower. Soles stitched to the upper using a Goodyear-type welt , and vibram-type molded soles can be replaced, but may cost more than a new pair of shoes. Tread wearout is very annoying if the upper and lining are still in good shape. If you have a hole, try using McNett Freesole. Thoroughly clean and roughen the surface with sandpaper and lighter fluid or naptha and applying it in an even layer that extends 1" beyond the hole in all directions....