Screen calibration after replacing digitizerI recently replaced the digitizer on my iPad4 and now the calibration is off. I've tried resetting the device and also restor...
Answer to: Home Button flex brokenYou can order the Home button flex cable from Amazon. I recently replaced the Home button flex cable on my iPad4. It's close in work because the connector is very small.
Answer to: How much heating I need to put on when taking apartAll you really need is a hair dryer and a tool to remove the digitizer screen. You need to apply heat to the edge of the device until it is hot to touch. Once you have done that, you slowly begin to pry open the screen a little bit at a time. You will need to apply heat each time to continue to pry open the screen. I would suggest placing something like a guitar pick to maintain the spacing once you've begun lifting the digitizer. Better yet, order a repair kit and get the proper tools for the job.