Screen failure on s3 miniI have replaced a screen on an s3 mini and I can't see anything wrong with the old screen, only damage to metal tape undernea...
galaxy s3 not chargingI am in the process of trying to repair a water damaged S3. When i received it, it was completely unresponsive, although owne...
Answer to: My 4S doesn't stop rebooting. After OperationHave you tried testing the phone by replacing old screen? You don't need to completely dismantle, just pop off LCD and digitizer connectors and plug old ones back in. If phone works (minus touch capability obvs) then it sounds like a problem with screen. Dont always buy cheapest screen you can find, look at feedback ratings for seller. Also check everything is grounded properly all the gold connectors are where they should be etc. If you can get it in DFI mode then mac will have easier time finding it.
Answer to: Inside Corner Screw Issues00 should work fine, ive never had problems with it. is it all the corner screws or just one? The one next to vibrator can be quite tricky. If worst comes to worst, you can pick up a full replacement set of screws for like a quid of eBay.