Answer to: iPod won't power on after screen replacement, even when plugged inGot an email from Andrew. Hey man, if the battery has no charge then the grounding thing is not going to work. you might try it with the cable hooked up. or leave the thing charging for a long time and then try. it has to have current for that to work. if there is no way to charge it, it;s possible your battery is dead as can be and you need a new one to get the current. see what I mean? has to have power source to be able to kick it over.
Answer to: iPod white screen after repair the screen.LOL you know whats funny. I just figured out ( last night , i was up all night working on ipod touch 4's) how this is done. 1 thing is for certain. most every white screen that appears to be ruined. is actually good. the other thing - if the white screen effect is not solid but instead has streaks or partially covered reddish lines. That is a bad screen. it's the screens male end or the mother boards female side. the pins are crossing from being bent or broken off or whatever. or it could be the ribbon jacked. sometimes you can straighten the pins back out and get it to work but i do NOT want to get into that because it's so hard it just !@#$%^ me off to think about it, I will tell you this though, you will need a huge lighted magnifying glass to do it and good freaking luck. moral of that story is do not push that plug to hard. LOL your white screen problems are not from a bad screen, your white screen problems are from the gpu getting shut off and on at the wrong times or super fast or when ever it just doe...