Pressure on screen switches ring/silent. What to replace?When "vibrate ring switch" is on "ring", applying pressure to the upper left corner causes it to toggle between "ring" and "s...
Answer to: Silent switch installation tipsI just did this. It was a bear. I held the three pieces aligned and tight with tweezers. With magnetized screwdriver, I placed the screw on the right (as seen from inside the phone) in it's hole and turned it counterclockwise until it popped into the threads. I tightened it almost all the way but not quite. Then using tweezers I moved the pieces until the holes on the left all aligned and after multiple tries I got the screw into that hole. I then again loosened the screw until it popped into position and then tightened. The left screw is positioned so that you have to tighten it from an angle. Good luck.