No Notification Centre After RepairRepaired the iPhone's home button which i had to take the lcd display out beforehand and now after reassemble notification ce...
Is it possible to replace top lid?Is there anyway the top lid can be replaced, including the Apple logo?
Why is my LCD weak when touched and dark corners?When touching the screen ever so slightly it shows the same characteristics that would happen when you really push a screen h...
Answer to: Why "No Service" after replacing LCD screen?There's about 4 ways I found you can solve this problem. Before a repair, take back off and follow steps up to and including the dock connector flex cable peeling back enough to see the "blue inductor coil" if present, continue repair. Make sure that logic board is seated 100% correctly and that the speaker assembly has all 4 metal clips under the metal bezel. Then make sure that the antenna cable is clicked on properly but be very gentle with it, try not to bed and push down lightly with spudger. Make sure metal bracket is seated correctly under battery connector to ensure it makes contact with the back plate you put back on. Hopefully this helps some people :)