Late 2008 MacBook Pro 15" LCD ASSEMBLY on MacBook Pro 2009Hey I have a late 2008 LCD assembly and I attached it to my MID 2009 15" Unibody Macbook Pro and it works perfect! But it won...
Answer to: How to replace textile dust protector on optical drive opening?its glued down just pry it off dont be shy and use the screws when you reattach its more than enough to keep it in place
Answer to: liquid spill. keyboard not working, replacementyou can replace the keyboard just follow the directions for removal of the superdrive than the logicboard, then you should remove the backlight film which is the black plastic layer which is in place using adhesive then remove the keyboard which is screwed in with 50+ tiny screws
Answer to: Liquid damage, post logic-board replacement, still doesn't bootThis could have happened if you originally blew out your lvds cable coming from your lcd display from the original spill so please check the lvds cable to make sure none of the pins on the connector are burnt/black/bent/damaged if so then most likely you blew out the new working logic board with a bad lvds cable from the your old machine, seen it happen way to many times before but if your lucky you may just have to replace a 2amp fuse to get the backlight working again