Digitizer is higher than metal bezel after replacing back cover.After I replaced the back cover, the digitizer assembly doesn't sit flat with the metal bezel. I can see it is higher on one ...
Answer to: Digitizer is higher than metal bezel after replacing back cover.I didn't get a chance to thank you, Pollytinto, for the answer. But my problem was not of the above. I know the two tabs have to fit into the notches. I just want to add here what I found is that: Since I replaced the back cover, I also changed the headphone flex cable and the ring for the headphone jack. They were aftermarket parts and they didn't fit properly and therefore pushing the screen up higher. After I tried a different ring from another seller and put back the original flex cable, everything was OK. Hopefully, this will give more help to those who experience the same issue. Thank you again Pollytinto.