Answer to: The washer will barely agitate and does not spinGetting shocked isn't a good thing and I'd double check how you put the wiring back on. Be sure the unit is grounded! A visual inspection that no wires are loose. You don't have a outright short otherwise you'd be blowing your breakers and the motor would not be running at all. Might your part number be GLEH1642FS1? If so... Describing a partially moving agitator can possibly be another issue. Your unit has a drum drive belt, a $15 part. It could be slipping. Do you smell anything when it runs, kind of a burnt rubber smell? Another part that often causes spin issues is the door switch assembly. It will allow the pump to operate, but it can cause the spin to partially work or not at all.