My Favorite Guides
CPU Fan runs at 4000 rpm after HD replacementI have previously posted another question about what to replace when i had a faulty HD on my imac. That was answered really s...
HD Fail - replace with HD+SSD or SSHDHi I have looked through the existing posts, all of which are very helpful but i'm looking for an up-to date solution to my p...
Answer to: CPU Fan runs at 4000 rpm after HD replacementJust wanted to feedback in case anyone else had a similar problem. My problem ended up being a damaged temp sensor cable. This must have happened during my refit of the components. Anyway, i just wanted to share with you - Thanks Dan for your help. I will also post this in my other question that mentioned the temp sensor fault. I ended up having to take it somewhere - place called thebookyard in the UK, great service!
Answer to: HD Fail - replace with HD+SSD or SSHDThanks Dan - are these the 2 points you mean, essentially checking that the wire from the connector is connected to the pin on the logic board. (see red squares on image) - Also, i suppose it's worth checking continuity from where the sensor attaches - is there an image of this?