LCD shutoff when pressure is appliedAfter replacing the digitizer on an ipad mini wifi, the LCD shuts off when pressure is applied to the digitizer. At first i t...
No display after control board and LCD repairWhile doing a digitizer repair, the control board was damaged and needed to be replaced. I purchased one on ebay for an iPad ...
Motherboard overheating after camera repairRecently a customer brought in an ipod 5th gen for screen repair. During the repair the front facing camera was broken and ne...
Answer to: LCD shutoff when pressure is appliedit turns out that there are 2 magnets that must be swapped from the old digi to the new one. I assume they work with magnetic screen covers (when you cover the screen it shuts off). Anyway, I took the old magnets off (a step i missed in the guide) and put them on the new digi and it works perfectly. Mission accomplished.