Answer to: Left Analog Stick not working properlyI have this problem too. If the re calibrating is not working just get a size 00 screwdriver and take out all the screws on the shell. Remove the battery case with the same screwdriver to revel the circuit board. The ZL and ZR button may fall out, but don't worry as these can be easily put back. Find the location of the l stick in the circuit board. You should see the screws at the edges of the green circular plate. Take these out, and pull the stick out. After that, try putting it back on and playing. If it is still not working, then you will need to buy a new stick. Then follow the steps again and place the new stick in.