Consider adding a caution about the black and gold ribbon cable attached to the screen that could potentially rip out when removing the screen.
Indicate the total number of screws that need to be removed in this step.
In the "Rear Camera Replacement" guide, the pictures and steps show disconnecting ribbon cables to remove the motherboard. This step is skipped in this guide.
The part removed in this step is a cover, not a housing.
Screws should be circled in red to indicate their location.
Consider switching the order of pictures 2 and 3.
The "connectors" referred to in this step and the following two steps are ribbon cables.
Housing refers to the larger portion of the device that holds most of the internal components. The part being removed in step four is just a cover.
This verbiage from your camera replacement guide was more effective: Gently lift the back of the phone by sliding your nail into the grove. Start from the bottom and work your finger up along the sides of the phone until the backing is off.