Jozo Bazina

@repairpro

Jozo Bazina

363	Reputation
66	Solutions
0	Guides
Member Since 09/17/2013

Over 10 years of PRO Repairs in memory. Replacement, reparation, micro soldering and several one stop shops in chain. Looking for global partners.

Team

BRZI SERVIS

Fast smartphone and tablet service, accessories and devices.

Votes

Apple Repair enthusiast. Love Macs also. Need help? Contact me. ;)

Completed Guides

MacBook Pro 15" Retina Display Mid 2012 Battery Replacement

iPhone 7 Screen Replacement

Mac mini Mid 2010 Hard Drive Replacement

MacBook Pro 13" Retina Display Early 2013 Battery Replacement

iMac Intel 21.5" EMC 2638 Display Replacement

iMac Intel 27" EMC 2429 LED Driver Board Replacement

iMac Intel 27" EMC 2429 AirPort Card Replacement

MacBook Pro 17" Unibody Logic Board Replacement

Nexus 5 Battery Replacement

MacBook Pro 13" Retina Display Late 2012 Battery Replacement

Page 1 of 3

Answer to "iPhone 5s shows no image after screen replacement..." 10/07/2017
Please try new front panel, it should solve your problems.
Answer to "Front camera sometimes stops working after touch ic replacement." 12/06/2016
Probably connected to touch ic replacement, check under the microscope if everything is ok!
Answer to "Touch id no longer recognizes my thumbprint when case is on phone" 12/06/2016
It gives you some kind of bad electricity circuit to your phone....change the case, no other solution. Would suggest Rock Royce ;)
Answer to "Doesn't wake up after sleep mode" 12/06/2016
Was it water damaged? Have you tried hard reset? This is known issue when the power flat was loosing contact, but you say it isn't hardware issue... If software doesn't work, I would bet on motherboard problem...
Answer to "My front camere is white blurry after screen replacement? T" 11/09/2016
Probably it moved a bit and you need to center it again.
Answer to "Backlight goes dim when typing" 11/09/2016
Try replacing proximity cable, maybe somewhere is scratched or broken. Good luck!
Answer to "SSD write speed low" 11/09/2016
Hm, try resetting the PRAM and see what happens. Also, check if the RAM memory works ok. Also, please check that the SATA cable isn't scratched somewhere or it wasn't put the right way in the bracket. Good luck!
Answer to "Why is only one "wet indikator" red" 11/09/2016
It is possible, water didn't go all the way trough the iPhone...often situation in servicing business. If everything else is ok, don't bother, carry on with usage...
Answer to "Screen is displaying vertical lines of various color after drop." 11/07/2016
LCD problem, replace it.
Answer to "Sync problem after 6/28 update" 08/02/2016
Try reinstalling the Smart Swith or Kies, dont know what are you using...