Guides I've Contributed To
My Favorite Guides
Page 1 of 7
Answer to "Printer still indicate low ink?"Done! The gear was still there but it was almost totally off the shaft. I applied a small dab of Gorilla glue in the gear and pressed it back on. And now I have a printer again!
Answer to "How does the Ipad Air screen replacement digitizer cable fold and glue"While I've never broken a flex cable I've resigned myself to the fact that an iPad with aftermarket adhesive holding the digitizer in place will never hold together as well as the factory glue. I inform people of this before starting the repair and when I hand it back I have kapton tape holding the digitizer in place externally. I usually recommend they get an otterbox style of case to help hold it and to hide the tape. It sucks, but it's better than a broken iPad.
Answer to "Ice is forming on inside bottom of freezer/side by side"There is a drain in the back of that area that may be clogged. My mother in law has the same issue and I hope to try and fix hers in the next couple of days. I found some information at http://www.justanswer.com/appliance/85hp...-good-evening-i-whirlpool-gold-gi6fdrxxy-fridge-french.html
Answer to "Earpiece does not work, speaker and earphone are working"Is there anything stuck in the headphone jack? Have you backed up the phone, and then reset the phone to factory settings and tried to use the speaker before restoring your backup? Beyond that it sounds like it might be an issue with the logic board.
Answer to "Replaced screen, now it's not turning on. What did I do wrong?"I read this: iPhone won't power on after repair. and decided to hook the phone up to my computer. It was in restore mode and would not come out. I clicked the Restore button in iTunes and it went through the process and the phone is now working fine!