Tiny Machines 3D

Looks like you corrected it before we responded. Making a simple mistake is ok. We do link the firmware needed for this in the guide (Step 12)

Sounds like you have a wiring to firmware mismatch - 2 pin connector should be connected to Z+ like shown in Step 7 and firmware for the CR-10S Pro V2 should be used.

What are you referring to? If you’re having issues with a firmware update, the best way to contact us is email - support@tinymachines3d.com.

https://docs.google.com/document/d/1lkhv... is where we have the latest files.

No. Once you add a BL Touch per our guide, you will use V2 firmware from now on.

No, please read our entire guide. It plugs into Z+ just like the CR-10S Pro V2 and CR-10 Max. The firmware determines which pin to use. Z+ is correct.

Watch our video. The system doesn’t freeze but rather starts a process when you press the “Measuring” button where it heats the bed, auto homes then starts probing 25 points. https://youtu.be/4ii58n5ha1s

See the next step.

V2 and use Z+ port on the mainboard.

No, we don’t mean this at all. We want people to understand that there are some differences between our firmware and stock and the configuration outlined in the guide must be followed for the firmware to work correctly.

If you purchased the kit from Tiny Machines 3D, you can contact us directly at support@tinymachines3d.com

This guide is for customers but as it is public, it is open to all as reference. If you are having issues beyond that, check wiring.