Questions
-
3rd Gen iPad with the Digitizer and LCD BondedAnybody else encountered an iPad Retina with the LCD bonded to the digitizer and front glass? I have a model A1416 64GB that ...
Answers
-
Answer to: 3rd Gen iPad with the Digitizer and LCD BondedOkay, I was mistaken! I was inadvertently separating the front glass (shattered) from the digitizer, not the LCD. Once the edges were free of the frame, the assembly lifted up revealing more layers of glass underneath; the actual LCD I presume. The lesson being that if the front glass is severely fragmented, it can be impossible to pry up the edges even if the whole front is taped over. And sliding the opener picks between the front glass proper and the very thin glass of the digitizer panel is possible while they are warm.
Guide Comments
Active Hours
The time of day that you have been active over the last 90 days. Each line on this graph is an action you performed on the site (we only count major actions, like voting and editing posts). The numbers on the bottom of the graph are the hour of the day in Mountain Standard Time.
Reputation over time
Reputation Breakdown
Event | Count | Delta |
---|---|---|
Accepted answer | 1 | 10 |
Badges
284822
Recent Notifications
Mark all as read
Show:
All
All
Unread
I'm trying to decide if I should give up on this repair. I don't know if i have an early production unit or what, but the digitizer glass on mine is bonded all the way across the LCD with transparent adhesive. (Model: A1416 64GB) I've looked around the Net and found another user asking about the same situation. Apparently very rare.
Great guide! I'm a bit confused by the camera descriptions.
Which is "front"? The text seems inconsistent but it could
just be my confusion. When face-to-face with an iPod, the
camera on its *back* shows what's in front of you. Is that
the "front camera"?
.
- jam