Why wont the wires wont reconnect after replacing my charge port?After replacing the charge port I cannot connect the ribbon cable which leads from the charge port to the motherboard. For so...
Answer to: Why wont the wires wont reconnect after replacing my charge port?Okay so I have jerry rigged my iphone to work by plugging my original charge port back into the motherboard, even though i didnt swap out the old - I have created a Franken phone…The issue I am having is two fold 1) when i lay the charge port on the back of the phone it is to high up the phone and i cant readjust it down - i had to have heated up my phone a dozen times to the release the adhesive and nothing worked. Secondly the speaker cable wont connect to the logicboard and im pretty sure its broken. Im gettin an iphone 8 but want to still fix this phone. The problem i was having originally was that my phone couldnt make calls without my bluetooth and i read that it may be cause by the charge port. And Howard, i dont think the port on the logic board is broken because im charging my phone now, I think i may have bent the new charge port pug or need to somehow shift it lower.