Answers
-
Answer to: The printer is not printingMETHOD1: UPDATE DRIVERS Step1: Press start button and select control panel option. Step2: Open device manager and search network adapters. Step3: Select the mode to which printer is connected Ethernet or Wi-Fi. Step4: Check driver for updates and check if the driver is running successfully. Step5: If not running disable the driver and enable it again. METHOD2: SOFT RESET PRINTER Step1: Switch of the printer and disconnect all the cables. Step2: Press and hold power button for approximately 60 seconds. Step3: Restart the printer and check the error is fixed. METHOD3: SEMI RESET PRINTER Step1: If on opening the printer door there is no paper stuck in the printer go to step2 or if found remove the paper carefully and restart the printer. Step2: Press home button and navigate using keys to support menu. Step3: Enter support menu and you found support x where x will be model number. Step4: Now press > button till you find resets menu and press ok button. Step5: Now country and language reset occurs press right but...
-
Answer to: How do I resolve the boot to black screen problem?After restarting the computer you can press F10 on the blank screen to enter bios mode you may require to reboot Hp till you enter BIOS . But if there is no display try to connect your device to the external monitor and after connecting check if you are getting display on the external computer.
-
Answer to: Is this LVDS cable look kinked?Look a like cable is not a key role for making connection between display and connector the only concern is this the connecting slots must be same to the removed cable and the pairing of cable to the slots must be same to the removing cables.
-
Answer to: Won't power on with 60 watt but will with 85 watt MagSafe2 charger?In some macs lower voltage chargers are not capable of charging so you require a high voltage charger for charging or switch on the computer as required by the system however high voltage doesn’t help you to charge faster and neither do it will harm the computer on long life may be you see an effect.
-
Answer to: Won’t come out of sleep modepress and Hold Shift + Control + Option and Power button for 12 seconds. Release all keys at the same time, then reconnect the Power cable and turn the Mac back on again. Now, reboot the Mac again and this time hold down Command+Option+P+R keys concurrently for about 20 seconds, this resets the NVRAM and restart Mac
-
Answer to: No Boot Device Found and Hard Drive Working Outside Normal ParametersNo boot device found will be seen when the path for operating system is introduced with an error or you have to install clean windows
-
Answer to: Bottom of screen popped out. Something inside must have repositioned.toughest part of this laptop is you have to tear down the keyboard using a knife as the screws are found below keyboard of the laptop as stated in ifixit Microsoft Surface Laptop Teardown
-
Answer to: How do I replace CMOS battery in my asus n552vw?C-mos battery will be located on the mother board it can be in a yellow or black color covering connected to mother board in circular structure and will be connected using black and red two pin cable to the mother board after disassembling complete laptop you will get the battery connected to the motherboard.
-
Answer to: Why does my Toshiba laptop boot multiple times before going off?Try to reboot into safe mode with networking by pressing F1, 0, and F8 and boot into safe mode with networking and check if the issue persists.
-
Answer to: MBP black screen, then back to normal...?First run apple complete diagnostics on your Mac and install battery doctor i prefer coconut battery and check if in diagnostics you receive any kind of hardware issue. If not update you operating system drivers as well as BIOS and then check if its working fine or you face any issue
Active Hours
The time of day that you have been active over the last 90 days. Each line on this graph is an action you performed on the site (we only count major actions, like voting and editing posts). The numbers on the bottom of the graph are the hour of the day in Mountain Standard Time.
+12
Reputation over time
Reputation Breakdown
Event | Count | Delta |
---|---|---|
Post was voted up | 42 | 504 |
Answer accepted | 10 | 300 |
Your post deleted due to flags | 1 | -100 |
Badges
2604026
Recent Notifications
Mark all as read
Show:
All
All
Unread
You're on top of things! No new notifications.
-
Nick commented on your answer to "Is this LVDS cable look kinked?"
-
@nick accepted your answer to 'Is this LVDS cable look kinked?'
-
Shreyas kini accepted your answer to 'The printer is not printing'
-
Nick commented on your answer to "Is this LVDS cable look kinked?"
-
Ryan T. M. Reiffenberger commented on your answer to "How do I resolve the boot to black screen problem?"
-
NamelessChat commented on your answer to "Hard Drive Issues: Code 8. What does it mean?"
-
H Duns commented on your answer to "Won’t come out of sleep mode"
-
@hduns accepted your answer to 'Won’t come out of sleep mode'
-
@danj mentioned you in a comment
-
Dan commented on your answer to "I was using my computer, and it suddenly shuts down, won’t turn on"
-
Ray Franklin commented on your answer to "Bottom of screen popped out. Something inside must have repositioned."
-
Signe commented on your answer to "X200s - stuck in Intel(R) Boot Agent) - caused by loose battery?"
-
Laurence commented on your answer to "No operating system or damaged Mother Board"
-
Signe commented on your answer to "X200s - stuck in Intel(R) Boot Agent) - caused by loose battery?"
-
@signe accepted your answer to 'X200s - stuck in Intel(R) Boot Agent) - caused by loose battery?'
-
Laurence commented on your answer to "No operating system or damaged Mother Board"
-
David LEE commented on your answer to "OWC Aura Pro SSD not recognized"
-
Daniel Venegas accepted your answer to 'Why is the new replacement battery not charging?'
-
mayer commented on your answer to "Why is the new replacement battery not charging?"
-
Chekad Sarami commented on your answer to "Frequent crashes: Dyld Error Message: Symbol not found: clock_gettim"
-
Aaron Cooke commented on your answer to "How do I fix broken audio jack?"
-
Tyler Meece commented on your answer to "How do I fix broken audio jack?"
-
Bikash Rai commented on your answer to "My trackpad is not clicking"
-
@danj mentioned you in a comment
-
Dan commented on your answer to "Upgrading Logicboard 2017 to 32gb ram"
-
@ronnham accepted your answer to 'Upgrading Logicboard 2017 to 32gb ram'
-
kcatelin accepted your answer to 'What's wrong with my display?'
-
@danj mentioned you in a comment
-
Dan commented on your answer to "Upgrading Logicboard 2017 to 32gb ram"
-
icarocusse commented on your answer to "How to reset the BIOS password?"
-
@shadyoskar mentioned you in a comment
-
@shadyoskar mentioned you in a comment
-
@pollytintop mentioned you in a comment
-
SMS commented on your answer to "How to reset SMC on the 2018 MBP?"
-
Dan commented on your answer to "How to reset SMC on the 2018 MBP?"
-
SMS commented on your answer to "How to reset SMC on the 2018 MBP?"
-
Aaron Cooke commented on your answer to "How to reset SMC on the 2018 MBP?"
-
SMS commented on your answer to "How to reset SMC on the 2018 MBP?"
-
Dan commented on your answer to "How to reset SMC on the 2018 MBP?"
-
SMS commented on your answer to "How to reset SMC on the 2018 MBP?"
-
Dan commented on your answer to "How to reset SMC on the 2018 MBP?"
-
SMS commented on your answer to "How to reset SMC on the 2018 MBP?"
-
Logan Henry commented on your answer to "How to reset the BIOS password?"
-
lesly23 commented on your answer to "sony viao vgn tz37cn no post no display"
-
Dan commented on your answer to "Display not working, HDMI out and Thunderbolt okay?"
-
gary.hamilton commented on your answer to "Display not working, HDMI out and Thunderbolt okay?"
-
@ichtrojan accepted your answer to 'vertical bars on my display'
-
Karim r commented on your answer to "Why my laptop keep restarting when battery is plugged in?"
-
Michael Okoh commented on your answer to "vertical bars on my display"
-
@ichtrojan mentioned you in a comment
- View More...