My Sega Genesis II wont stay onIf i move the power supply cord it turns off and i have to run the power cord under the console for it to stay on
Answer to "How do I remove a stripped screw in a Nintendo 3DS?"the only way that i found that works is to use a drill and bit to drill the head off the screw and then you have to take a pair of small pliers like needle nose or needle nose vise-grips to very carefully remove the rest of the screw and you might have to cut away a little of the plastic tower that it is in so that you can grip the remains of the screw and turn it out because i had to on my first gen 3Ds and my DSlite and i found the best place to get replacement screws is from other broken electronics that cannot be fixed like old cameras that have been dropped and wont take a good picture anymore. you just have to match up the screws so that are very similar diameters for the threads and the heads and make sure the thread pitch/coarseness/space between the threads is very close so that you don’t strip out the plastic and it you have to cutaway some of the plastic you may have to make shims/spacers and glue them in place depending on how much you cutaway and where it is at to keep the integrity so you...
Answer to "Phone glitching and freezing"i have the same phone . it helps if you restart it at least once a week and also install a cleaning app to clean up the memory and get rid of any unwanted files like the cache and turn off your WiFi and Bluetooth and other wireless functions as they drain your battery fast and can also really slow down your phone because they put a drain on its ram (random access memory) . the apps i use are Du battery saver for my battery and mobile optimizer to get rid of unwanted files and clear cache. i also have all my music and pictures and other files like PDF's on my micro SD card
Answer to "My Sega Genesis II wont stay on"the power supply input port on the console probably needs to be re soldered because its loose on the circuit board