iPhone 5s water damage, gets warm but won't turn onso i have 2 water damaged iphones 5s that won't turn on and seen by itunes. already cleaned with alchol, changed battery but ...
Answer to: Error (-1) baseband repair?Hi! the only way to fix the error (-1) is to reball the baseband. with baseband dead you will not be able to use wi-fi - the ipad will not see internet. you can temporary switch it on for example for restoring or updating if you push the modem chip really hard while restoring (needed in the end of operation, 80-100% of the progress), but it won't work after you stop pushing. smb told me that works also to restore an ipad while it is in the freezer, but as you take it off it will lose the signal again. hope that this can help you
Answer to: phone works but touch screen is unresponsive after water damage.3 possibilities: 1. dead touch connector on screen 2. dead touch connector on logic board 3. dead touch chips on logic board try another LCD, try to clean gentry the connectors with alchol and a toothbrush. if doesn't work - take it to the service to change chips.
Answer to: Constant searching, no signal.if in General setting there is nothing written at Baseband version, seems to be dead baseband chip on logic board. You won't do it at home, service only