Guides I've Contributed To
Answer to "Why is my wheel not touching the ground?"If the wheels are not all touching the ground, check if the wheels have been properly installed. The front wheels should have arrows on them that both point up, and the back wheels brakes should flip downward. If one of the wheels is not properly installed, just press the silver pin and pull the wheel to remove it, and install it the correct way. Refer to either the front wheel guide or the back wheel guide for more information on replacing the wheels.
Answer to "What tools are needed to take off the main basket?"The basket component for this stroller does not have screws, just clip-on straps. To remove, simply just undo the 4 clips and remove the basket.
Answer to "How do I put the screws back in after removal?"It is important that during dissemble, you do not lose any of the screws or washers, as it would make it impossible to properly put back together. The basket for this stroller does not have any screw components, just clip-on straps. To put back on, just unfold the stroller, and clip the straps to the front and rear parts of the frame. You can reference the device picture if you are unsure where to clip the straps to the frame. Refer to our guide for more information on replacing the seat.