Guides I've Contributed To
Answer to "Why won't my tablet hold a charge?"For additional information, follow the steps on the troubleshooting page.
Answer to "Cracked screen won't work"Replacing Broken Screen Removing Cover 1. Dislodging cover • Take tablet and rotate on its side, so that the two screws are facing upward. • Use 1mm Phillips screwdriver to and insert into screw hold on the left side of the tablet. • Rotate screwdriver counterclockwise to remove screw from its port. • Follow steps 2 and 3 to remove second screw on right side of tablet. (Both set screws will be removed from device) • With screws removed, insert plastic prying tool and pry back case away from the device slowly moving the plastic prying tool along the device. (Case should easily dislodge from tablet. 2. Remove speaker from cover • Hold positive and negative wires as close as possible to the speaker. • Use plastic prying tool and fingers to simultaneously lift speaker from cover. (All connections from cover to tablet are removed) • Set cover aside. Removing Battery from Device 1. Locating battery • To locate the battery, look to the left upper-hand corner, and find the silver rectangle taking up 3/4 of the...
Answer to "How do I perform a hard restart?"Trouble with Reset If protection software does not correct the problem, on the back of the 4Sight there is a small hole that is labeled "Reset". Using a pen or a paperclip, insert the tool into the reset hole and you will fell a slight depress of the button inside. Pull the tool out of the reset hole and the device should be powering back on. Trouble with Hard Reset To proceed with a hard reset, there are several options for Android powered devices. Hold the "Up Volume" button on the side of the tablet, while holding the power button, this should start the reset process. If this does not work, you can try, holding the "Down Volume" button and the power button. 4Sight 9 Troubleshooting