Get quick access to guides, parts, and answers for your devices
Looks like your cart is empty
I used a Swiffer dry cloth to get all the dust off the screen while just blowing with my mouth at a steep angle. I know I didn't get every speck, but the screen looks perfect once assembled and lit again. Removing the glass from the screen is pretty easy if you need to re-clean it.
This was too tight to get with my hands. I used needle nose pliers to grab the plastic connector and it popped right out. I need pliers to get it to snap back in too. The wire itself if very thin so be sure to only grab the connector.
I opened the case as far as I could without stretching this cable and used my fingers to get it. The end of the ribbon where it connects is stiff, so you can grab it there. There's not connector; the stiff part just slides in and out. Getting it back in is a pain, but if you get the perfect angle it slides back in without much force.
Wrote comment "Installing iMac Intel 27" EMC 2309 and 2374 Glass Panel".
@ 08:57:18 AM
Earned Novice Repairman Badge
@ 12:29:13 PM
Wrote comment "iMac Intel 27" EMC 2309 and 2374 Display Replacement".
@ 01:22:29 AM
@ 01:17:30 AM
Successfully completed iMac Intel 27" EMC 2309 and 2374 Hard Drive Replacement.
@ 01:10:13 AM
Liked iMac Intel 27" EMC 2309 and 2374 Hard Drive Replacement.
@ 10:15:39 PM
Liked iMac Intel 27" EMC 2309 and 2374 Teardown.
@ 10:12:02 PM
Liked iMac Intel 27" EMC 2390 Hard Drive Replacement.
@ 12:50:11 AM
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.