Fix Your Stuff Community Store

iomega LDHD250-U Teardown

What you need

  1. iomega LDHD250-U Teardown, Remove Rear Screws: step 1, image 1 of 1

    • Remember to power off and unplug the unit before opening it up!

    • Remove the two PH #0 Screws

    Edit

  3. iomega LDHD250-U Teardown, Removing the cover: step 2, image 1 of 2 iomega LDHD250-U Teardown, Removing the cover: step 2, image 2 of 2

    • After removing the back part of the unit, slide the front part out.

    • Remember to put aside the center part you removed

    Edit

  4. iomega LDHD250-U Teardown, Removing the Hard Drive: step 3, image 1 of 3 iomega LDHD250-U Teardown, Removing the Hard Drive: step 3, image 2 of 3 iomega LDHD250-U Teardown, Removing the Hard Drive: step 3, image 3 of 3

    • There are two ways to remove the Hard Drive

    • 1. Removing the 4 screws on the side of the unit

    • 2. Sliding the HDD back and then releasing it (my unit will not slide back)

    • The HDD can now be lifted out, unplugged, and replaced, upgraded, or keep it the same.

    • Pull up and unplug as the cables can break if too much force is applied

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Nate Pritzker

Member since: 10/12/17

431 Reputation

2 Guides authored

Badges: 11

+8 more badges

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 11

Past 30 Days: 33

All Time: 1,009