Turn Off the phone :), Remove back cover, battery and simcard + sd card from the phone!

Behind the battery, you will have to remove the CE sticker!

Remove from Sim-tray and down, it wont break.

Remove 7 bolts.

Release clickholders, 5 pcs (green). The back should lift up from the surround.

Release from the bottom up.

Release the Flex cable by lifting the lower end off the logic board, and lift off the back assembly.

Unclip the keypad/screen ribbon cable

Unclip the camera

Unclip the small tabs holding the motherboard down and slide it out.

Release Screen flexcable + lift off of adhesive under flexcable!

Remove 7 bolts (black ones), holding the slide/screen in place.

Remove 3 bolts, top right one is covered, look carefully

The Green line, shows where to flick the slide off of the screen assembly!

Easiest way: is to flick it at the top, where you removed 2 bolts. It will come off, pretty easy.

Once slide is removed, you got access to LCD and touch assembly. Easily remove the small flexcable from touch to LCD and take off LCD.

Only the Touch screen is left -> next.

The LCD and the Touch glass CAN NOT be separated!!!!!!!!

Go to step 10!

Use a thin tool to wiggle the touch screen from the metal+plastic frame, and then throw the lcd + touch screen into the BIN (ONLY IF U NEED TO REPLACE LCD OR TOUCH SCREEN)

I hope this 10 step guide helps some of you guys out there!

AGAIN:

Please scan, and "like".

And comment on my guide if you want :)

Thanks for watching!

<-- #BadNews... This is what happens if you try removing the touch glass from the LCD