Introduction

The push button did not lower the brush properly : a broken plastic inner-piece was hindering the lowering of the brush. This guide explains how to tear down the brush and put the borken piece away.

This teardown is not a repair guide. To repair your Rowenta silent force extreme RO5931 main brush, use our service manual.

  1. Turn off the vacuum and unplug it from the outlet.
    • Turn off the vacuum and unplug it from the outlet.

    • Unmount the main brush head from the cleaner pipe.

  2. Unsnap the clips of the top cover with a small slot screwdriver. Remove the top cover of the brush. Remove the top cover of the brush.
    • Unsnap the clips of the top cover with a small slot screwdriver.

    • Remove the top cover of the brush.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Unscrew both Philips screws from the top of the brush. Unscrew both Philips screws from the top of the brush.
    • Unscrew both Philips screws from the top of the brush.

  5. Unscrew both security torx screws. Unscrew both security torx screws.
    • Unscrew both security torx screws.

  6. Smoothly and carefully take out the top of the brush head. Take some time to search for the defect. Remove broken pieces and repair if you can.
    • Smoothly and carefully take out the top of the brush head.

    • Take some time to search for the defect.

    • Remove broken pieces and repair if you can.

    • Clean up the inner parts of the brush with a smooth cloth. Remove dust, grains that could damage the inner parts of the brush.

  7. Push the retract button : the brush must be lowered. Push the retract button : the brush must be lowered.
    • Push the retract button : the brush must be lowered.

David

Member since: 05/23/2014

479 Reputation

2 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 5

Past 7 Days: 22

Past 30 Days: 95

All Time: 95