Tools Featured in this Teardown

Introduction

New gigabit router simultaneous dual N-band from Netgear.

This product includes software code subject to the GPL or LGPL.

I'm hopeful for future OPEN-implementations.

This teardown is not a repair guide. To repair your Netgear WNDR3700, use our service manual.

Image 1/3: Image 2/3: Image 3/3:
  • Unpackage.

Add Comment

Image 1/3: remove 6 screws. Image 2/3: remove 6 screws. Image 3/3: remove 6 screws.
  • remove 4 caps.

  • remove 6 screws.

Add Comment

Image 1/3: uplift the board. this step is very easy!! Image 2/3: uplift the board. this step is very easy!! Image 3/3: uplift the board. this step is very easy!!
  • gently open the lid.

  • uplift the board. this step is very easy!!

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Remove the shield for microwaves circuit

Add Comment

Image 1/1: Look to the left, outside the shielding and see 4 mini connectors, then follow those to the square pads on the PCB... These are the antennas.
  • We can see 8 stand-offs to keep the covers from pressing down on the actual circuits.

  • Look to the left, outside the shielding and see 4 mini connectors, then follow those to the square pads on the PCB... These are the antennas.

Add Comment

anythingtoostup

Member since: 01/12/2010

158 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 18

Past 30 Days: 96

All Time: 32,570